Payment & Shipping Terms:
|Input Signal:||DMX512/1990||Input Voltage:||DC12-24V|
|Output Signal:||Constant Voltage PWM||Output Current:||5A X 4 Channels , Max 20A|
|Address Setting:||Dip Switch||Interface:||Pluggable Screw Terminals|
|Warranty:||3 Years||Materials:||ABS Plastic|
led driver dimmer switch,
remote dimmer switch
Max 5A*4CH DIN Rail Version DMX512 Decoder LED Dimmer Controller
Model : DE8704 Manual Download:DE8704 .pdf
DE8704 is the 4 channels product of DIN Rail DMX512 Decoder Series. DIN rail products is widely used Lighting field. It can realize removing after installing within a fixed rail. It can be wall mounted or inverted as you need. Much more easy to install and operation, beautiful appearance and rich function, this products will be your best choice of DIN rail DMX decoder.
1), Meets DMX512/1990,with RJ45 interface.
2), 256-levels brightness,full-color with driver controls.
3), Power without flashing, low jitter free.
4), 4 ways of output channel, single channel maximum 5A output drive, total output is less than 20A.
5), Can achieve asynchronous color changes effect under working with controller.
6), With the light color selected mechanism, and be able to control the light with 1~4 colors.
7), Setting the DMX address freely.
8), Modularizing and can be matched with different LED module neatly.
9), With function of DIN rail.
10), Custom-made is available and 3 years warranty.
|Model No.: DE8704||Control channels: 4CH||Signal Input: DMX512/1990|
|Input:: DC12-24V||Output: 5A/CH, Max 20A||MAX Power: 240W(12V)/480W(24V)|
|Frequency: 5000HZ||Warranty: 3 years||Protection Class: IP40|
|Work Temp.: -20~70℃||Product size: L107*W72*H59(mm)||Gross Weight:: 300g|
Specifications of DIN Rail Series:
|Channels||Max Current Load||Input Signal
|Max Output Power||DIN Rail|
Product Instructions of 4CH DIN Rail DMX Decoder DE8704:
1. The driving output interface of Yang drive, with 1 V+ ports and 4 channels CH1, CH2, CH3, CH4
output interface,can be connected with various full-color module and module automatically according to the lamp module load adjustment of output current, each channel shall not be greater than 5A.
2. Note: the total connection full-color module directly to the main line and CH1, CH2, CH3, CH4 control line is connected to the output of the decoder interface corresponding pins; single module can be connected to the decoder output interface is V+ feet, negative lines according to the output of CH1, this module is connected to the CH2 color decoder CH3, CH4, a foot on amonochrome module; several colors received the same decoder output interface, will be their main line are connected to a decoder of V+ feet.
3. Self-test Function: full bright mode, will be 1 to 9 of the dial switch upward pull full bright. Four
channel gradient mode, will be 1 to 9 of the dial switch down to pull out the channel gradient mode.
DMX512 Control System Connection:
1), DMX signal cable is shielded twisted pair cable(microphone cable) or three core cable, DMX signal positive, negative in the end, solder or crimp DMX signal cable plug should be paid special attention to the polarity.The input interface and corresponding signal output from the DMX512 controller, signal is negative, and the connection of DE8704 signal.
2), The DMX5000 output and DE8704 transmission line can't exceed 300 meters.
3), DMX5000 and DE8704 wiring, lighting by JBLED FLASH software can realize the control and
computer on-line,realize unlimited expansion cascade with DMX lamp.
4), Every connected 32 DE8704 control, DMX signal must be combined with a signal amplifier (such
as: RE2000),cascade cannot be more than 4PCS.
5), At the end of the line, shall be connected to a DMX signal termination (DE8704 dial switch tenth dial can).
Why choose us ?
(1)We are a manufacturer specializing in the R&D of LED Controllers over 8 years in Shanghai .
(2)All our products got the CE , ROHS certificates .
(3)Three years warranty for all products .
(4)OEM/ODM are available for us .
How could I pay for it ?
T/T , Western Union ,Paypal and Credit Card are available for payment .
How fast can I get these products ?
Usually , samples order within 2-3 working days. Batch order within 5-7working days .
What should we do if having problems after receiving your goods ?
Quality is our culture.Strictly inspected before shipping . Once you receivedissatisfied products , please contact us freely in time,we will do our best to deal with .
Contact Person: Andy