32 Channels Black LED DMX512 Decoder For RGBW Lighting Constant Voltage PWM Signal

Product Instructions:

1, DMX Signal IN/OUT interface: RJ45/3 Pin screws/5 Pin XLR connector. Specially 3 Pin screws interface with signal amplifier function.

2, DMX address encode with Dip-Switch(NO.1 to NO.9),comply to universal DMX512 dial code.

3, Dip-Switch NO.10 is termination for whole signal circle.

4, Dip-Switch NO.11 for Frequency option: ON 5000HZ(H), OFF 500Hz(L).

5, Dip-Switch NO.12 for Bit option: ON 16bit ,OFF 8bit.

NOTE: NO.11 and NO.12 change, come into operation when Re-Power on.

6, POWER IN DC12-24V, common anode constant voltage output, can meet all kinds of full color module andmonochrome module and automatically according to the lamps module load adjust output current, each channelmaximum current not more than 4 amps.

7, SELF-TESTING: put all Dip-Switch NO.1 to NO.9 off, full channels output 3 seconds, then each color gradient.

Wiring Diagram:
 

Instructions about DMX512 Control System Connection:

1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output signal positive,signal nagative,signal ground with DE8532 input interface corresponding connection.

2, The DMX5000 output and DE8532's transmission lines can't be over 300 meters.

3, The DMX5000 each interface can connect with no more than 170 pieces of DE8532. Eight output interface. Through the JBLED FLASH light making software,it can realize infinite connectting the DMX lights with computer on-line controlling.

4, When contacting 32 pieces of DE8532, DMX signal must add a signal amplifier such as RE2000,cascade can't more than 4 PCS.

5, At the end of the connection, we should connect a DMX signal termination when putting on the the NO.10 dip switch of DE8532.